|
The new M3 and M4
series can be used as a new installation or a retrofit onto an existing
tank(s). Since the unit is connected by hoses, and not hard pipe, the
placement of the mixer verses the tank(s) is less restrictive and allows
the contractor to configure the system to meet their needs of operation.
The M3 and M4
series mixers use 3” and 4” trash pumps respectively. The new units are
self-contained and have a small footprint, which makes them portable and
could be used at various sites, to mix a variety of dry or liquid
products into a fluid source. The units are available with different
drive configurations including gasoline, diesel, hydraulic, and electric
power. |
 |