Features and Benefits of the PR-10-T Pipe Roller
The PR-10-S was developed for the contractor who uses smaller diameter pipe sizes and varying job conditions. The
large flat bottom base makes the unit very stable. The high profile allows the roller to be used on the ground without
cribbing. This compensates for the pipe sagging and a greater spacing can be allowed between the rollers in the line.
The unit does not need to be reconfigured or adjusted (1 roller, 2 bearings) to handle different sizes of pipe. These
small units can be carried by one person, or by simply turning over onto the roller and rolled to the next spot. These
rollers are very rugged and versatile and can be used for many different applications on the job.
Specifications
Pipe Roller PR-10-T
Benefits
Dimensions
15" x 20” x 15 1/2” H
Large stable base with high profile to
381mm x 508mm x 394mm H
compensate for pipe sag
Weight
38 1/2 lbs. (17.5 kg.)
Can be handled by one person
Load capacity
2500 lbs. (1133.8 kg.)
Large capacity for heavier walled pipe
Pipe range
0-10” O.D. (0-254mm O.D.)
No need to adjust or configure
Base frame
Formed 12 Ga. Sheet Metal
Reduced bowing, bending or twisting
Bearings
2 @ 1 1/4” (3050lbs. Static load)
Easy rolling and greaseable
Main Shaft
1 1/4” alloy steel (6000lbs.capacity)
Less deflection and weight stress
Roller material
Solid urethane poured on shaft
Resist wear and protects pipe coatings
***
All Specifications Subject to Change Without Notice
***
Surface to Surface Inc.
PR-10-T
PIPE ROLLER
Surface to Surface Inc.
5150 Forest Road, R.R.#3, Watford, Ontario, N0M 2S0
Tel: 1-800-567-0978
05/28/02
15 1/2"
15.0"
20.0"
10 3/4"
O.D. PIPE